Extron DMP 64 Digital Matrix Processor driver for Windows 7 - Extron DMP 64 Digital Matrix Processor driver fro

Extron DMP 64 Digital Matrix Processor 1.01

Extron DMP 64 Digital Matrix Processor driver from Extron for OS Independent

Extron DMP 64 Digital Matrix Processor driver from Extron for OS Independent

Publisher review for Extron DMP 64 Digital Matrix Processor 1.01:

Before install Extron DMP 64 Digital Matrix Processor 1.01you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron DMP 64 Digital Matrix Processor . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron DMP 64 Digital Mixer Processor Firmware version 1.01.Fixes:
- Fixed Issue (originated in v1.0) Preset Recall Communication Error – At higher internal temperatures, a communication error may occur during a data intensive procedure such as a preset recall. This firmware revision fixes the preset recall communication error issue.
- Fixed Issue (originated in v1.0) Front Panel LED Freeze – On rare occasions, communication to the front panel LEDs may fail, causing the LEDs to freeze. This firmware revision fixes the LED freeze issue. 
Installation steps:
1. Download the firmware file.
2. Connect the PC to the device via the Ethernet port.
3. Access the device using the HTML pages.
4. Click the Configuration tab.
5. Click the Firmware Upgrade link.
6. Click the Browse button. An open file window appears.
7. Navigate to the folder where the firmware upgrade file was saved. Select the file.
NOTE: Valid firmware files must have the file extension ‘.S19’. Any other file extension is not a firmware upgrade. The original factory-installed firmware is permanently available on the device. If the attempted firmware upload fails for any reason, the device automatically reverts to the factory-installed firmware.
8. Click Open .
9. Click Upload . The firmware upload to the device can take a few minutes.

Operating system:
OS Independent